Sharp JW-50FL Uživatelský manuál stáhnout pdf (Strana 134)

2 - 58

Memory

Bit Write TYPE Remarks

M (auxiliary relay) 0 WM as word device

K (keep relay) 1 WK as word device

B (input/output relay) 2 WB as word device

L (link relay) 9 WL as word device

WF (special relay) 10

TS (timer/set value) 11 * 1

TR (timer/current value) 12 * 1

W9 (timer/current value 0.1) 13 * 1

CS (counter/set value) 14 * 1

CR (counter/current value) 15 * 1

BD (data memory) 16 * 1

WS (step control relay) 17 * 2

Wn (file memory) 18 * 3

Available Memory

15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00ZM-

FUJI 0123456789ABCDEF

*1 In case of the items which can display double word data (e.g. data display, graph, sampling), the

data is managed as double word data.

Both bit data and word data are managed as lower-half 16 bits data.

Input: 16 upper-half bits are ignored. Output: "0" is written in the 16 upper-half bits.

*2 Byte device such as step relay is managed as follows;

Input: Write "0" in the 8 upper-half bits. Output: Write the data in the 8 lower-half bits.

* Notes on converting the data file of ZM-70 (or ZM-30) into the ZM-** data file

When converting the data file of ZM-70 (or ZM-30) into the ZM-** data file, the PLC type is automati-

cally selected as "MICREX-F series ZM-70."

The order of bit significance in memory is reversed. Check carefully when specifying switch or lamp

data.

2 FUJI PC • 1

Set the memory to the extent of the memory range of each PC model. In case of using the

[Bit Write] memory as the bit device of the [Output Action] is [Momentary W], the other

bits will be cleared when the bit memory is output, because the [Bit Write] will be output

by one word (refer to P5-10, reference 14-7 of ZM-71SE Instruction Manual). Use [TYPE]

number to assign indirect memory for macro programs.

Available: Unavailable:

*3 To set up Wn (file memory), input [File No.] + [: (colon)] + [address] on the ZM-71SE.

<E.g.> W30 : 00002

File No.

Address

Colon

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 200 201

Žádné komentáře

Sharp JW-50FL Uživatelský manuál Strana 134