Sharp MX-M850 Uživatelský manuál stáhnout pdf (Strana 176)

100

101

Load the tab paper.

• When using the bypass tray, place the paper with the print

side up.

Place the paper so that the sides with the tabs enter the

machine last.

After loading the tab paper, configure the bypass tray

settings as explained in "MAKING COPIES USING THE

BYPASS TRAY" (page 40).

• If tab paper is loaded in a tray other than the bypass tray, see

"2. Loading Paper" in the User's Guide. After loading tab

paper in a tray, see "PAPER TRAYS" (page 14) to select the

tray.

The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm).

Press the [START] key ( ).

Copying will begin.

If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you

have selected sort mode, change originals and press the [START] key ( ). Repeat until all pages have been scanned and

then touch the [Read-End] key.

To cancel scanning and copying...

Press the [STOP] key ( ).

To cancel tab copy...

Touch the [Cancel] key in the screen of step 3.

System Settings (Administrator): Initial Tab Copy Setting

The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".

Front side

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 654 655

Komentáře k této Příručce

Žádné komentáře

Sharp MX-M850 Uživatelský manuál Strana 176

Komentáře k této Příručce

Související produkty a manuály pro Tiskárny Sharp MX-M850