Sharp AR-M162 Uživatelský manuál Strana 259

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 372
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 258
15
2
HOW TO USE THE NETWORK
SCANNER FUNCTION
This chapter explains how to use the network scanner function at the operation panel of the machine after the
settings have been configured in the Web page. The network scanner function is used to convert paper-based
information such as a photo or document into image data for transmission over a corporate network (intranet) or the
Internet to an FTP server or computer. When transmitting an image using the network scanner function, the
destination is specified by selecting a previously stored destination at the operation panel.
There are three methods for transmitting images:
1.The scanned image can be sent to a designated directory on an FTP server. (Scan to FTP)
2.The scanned image can be sent to a computer desktop on the network. (Scan to Desktop)
3.The scanned image can be sent to an e-mail recipient. (Scan to E-mail)
Before Scan to Desktop can be performed, the software in the CD-ROM that accompanied the network
expansion kit (AR-NB3) must be installed. (For the procedure for installing the software, see the "Sharpdesk
installation guide".)
Note
Zobrazit stránku 258
1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 371 372

Komentáře k této Příručce

Žádné komentáře