Sharp AR-810 Servisní příručka stáhnout pdf (Strana 261)

AR-651/810 RADF (DOCUMENT FEEDER) 16 - 36

(3) Original jammed not reaching the small original exit sensor (from the small original reverse side)

• Jam detection

This jam is detected during the time after an original reaches the small original reverse sensor

until it reaches the small original exit sensor.

• Jam timer setting

The setting value for the jam timer is the time mentioned above plus necessary time for an original

to proceed 60mm.

(4) Original jammed at the small original exit sensor (from the small original reverse side)

• Jam detection

This jam is detected during the time after the deceleration, which is set to finish at the position

20mm short of the small original exit sensor, starts until an original passes through the small

original exit sensor.

• Jam timer setting

The setting value for the jam timer is the time mentioned above plus necessary time for an original

to proceed 60mm.

16. 6. 6. Jams at intermediate transport section

(1) Original jammed not reaching the intermediate transport sensor

• Jam detection

This jam is detected during the time after an original reaches the 3rd roller until it reaches the

intermediate transport sensor.

• Jam pulse setting

The setting value for the jam pulse is the equivalent number of pulses it takes for an original to

proceed the distance from the 3rd roller to the intermediate transport sensor plus 30mm.

(2) Original jammed at the intermediate transport sensor

• Jam detection

This jam is detected during the time after the trailing edge of an original passes the position 20mm

further from the 3rd roller until it has passed through the intermediate transport sensor.

• Jam pulse setting

The setting value for the jam pulse is the equivalent number of pulses it takes for the trailing edge

of an original to proceed the distance from the position 20mm further from the 3rd roller to the

intermediate transport sensor plus 60mm.

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 341 342

Žádné komentáře

Sharp AR-810 Servisní příručka Strana 261