Sharp AR-650 Uživatelský manuál stáhnout pdf (Strana 62)

2. EDGE ERASE COPYING

If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.

In the edge erase mode, a white border will be created along the all edges of the copy eliminating

the marks. The default edge erase margin is 5 mm, but you can select any margin within the

range of 5 to 20 mm.

Example of Edge Erase Copying

Press the EDIT key to enter the Editing

menu.

. The menu on the right appears.

Procedure

Press the EDGE ERASE key to select the

edge erase function.

Original

Edge-erased copy

How to Change the Edge Erase Margin

. To change the edge erase margin, press the

5mm or 20mm key to select the desired

edge erase margin.

. If the settings are OK, press the SET key.

Notes:

. The edge erase margin changes at increments

of 1 mm on the front and rear sides.

. About 45 seconds after copying, the edge

erase margin returns to the default 5 mm.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 180 181

Žádné komentáře

Sharp AR-650 Uživatelský manuál Strana 62