Sharp MX-7500N Uživatelský manuál stáhnout pdf (Strana 8)

 [Middle] is recommended.

Note:

To return your preferences to the factory defaults, tap

the [Return Density Smoothing Adjustment Value to

Defaults] key. When a confirmation message appears,

tap the [OK] key. The machine reboots to return to the

factory defaults.

3) A test patch containing 4 columns of 28 patches (3-30)

is printed.

Note:

When the printing of a test patch fails, the following

message appears: Printing test patch has failed. Use

A4 or 8 1/2" X 11" paper for this adjustment. Press

[Execute] to print the test patch.

4) Select [4] or [31] for the number of adjustment points.

5) Enter the desired values and tap the [Execute] key

start the adjustment.

◆When [4] is selected in step 4):

Input range: [0] to [100]

Default: 50

C: POSITON (16) is fixed at [50].

◆When [31] is selected in step 4):

Example of the Density Smoothing Adjustment (Visual

Adjustment) screen

Input range: [0] to [100]

Default: 50

P: POSITON (16) is fixed at [50].

6) When the adjustment is completed, a completion

message appears and the adjustment result is printed.

Note:

When the printing of the adjustment result fails, the

following message appears: Printing adjustment

result has failed. Use A4 or 8 1/2" X 11" paper. Press

[Execute] to print the adjustment result.

 When the desired density is not achieved, tap the

[Readjust] key and repeat steps 3) to 6).

 When the desired density is achieved, tap the [Back]

key to return to the Laser Adjustment screen.

 Each colour can be adjusted individually.

 In 4-point adjustment (excluding fixed values), 4 points

can be entered to extrapolate and adjust all of the

remaining 32 points.

 In 31-point adjustment (excluding fixed points), each

point can be adjusted.

*Partial adjustment is possible.

1.1.4 Correction Amount Display

(Densitometer/Visual Adjustment)

This displays correction amount of density smoothing

adjustment.

1) Select [Correction Amount Display

(Densitometer/Visual Adjustment)] in the Laser

Adjustment screen.

2) Correction Amounts are displayed (display only).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Komentáře k této Příručce

Žádné komentáře

Sharp MX-7500N Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Multifunkční zařízení Sharp MX-7500N