Sharp MX-7500N Uživatelský manuál stáhnout pdf (Strana 6)

Machine Adjustment

1 Image Quality Adjustment

Select [Image Quality Adjustment] in the Machine

Adjustment screen.

1.1 Laser Adjustment

Select [Laser Adjustment] in the Image Quality Adjustment

screen.

1.1.1 Density Smoothing Adjustment (Auto

Adjustment)

This performs density smoothing adjustment for printing in

front / rear (main scan) direction automatically.

[Auto Adjustment] is recommended.

When adjustment need to be performed for each colour,

use [Densitometer Adjustment] or [Visual Adjustment].

Note:

Perform manual adjustment (Densitometer

Adjustment/Visual Adjustment) after auto adjustment.

When auto adjustment is performed the value set in

manual adjustment will be cleared.

1) Select [Auto Adjustment] in the Laser Adjustment

screen.

2) To print a test patch, tap the [Execute] key in the

Density Smoothing Adjustment (Auto Adjustment)

screen. If you need to change the density, select the

desired density and then tap the [Execute] key.

 [Middle] is recommended.

3) A message “Value set at Density Smoothing

Adjustment (Densitometer/Visual) is cleared if executed.

Execute?” comes up when you tap the [Execute] key.

Tap the [Execute] key to continue if you do not see a

problem. Tap the [Cancel] key if you do not want to

clear the value.

Note:

To return your preferences to the factory defaults, tap

the [Return Density Smoothing Adjustment Value to

Defaults] key. When a confirmation message appears,

tap the [OK] key. The machine reboots to return to the

factory defaults.

4) A test patch is printed.

Note:

When the printing of a test patch fails, the following

message appears: Printing test patch has failed. Use

A4 or 8 1/2" X 11" paper for this adjustment. Press

[Execute] to print the test patch.

5) Place the test patch on the document glass and tap the

[Execute] key to start the adjustment.

Note:

When the scanning of the test patch fails, the

following message appears: Auto adjustment has

failed. Please check if the test patch is properly set on

the document glass. Press [Execute] to resume

scanning.

6) When the adjustment is completed, a completion

message appears and the adjustment result is printed.

Note:

When the printing of the adjustment result fails, the

following message appears: Printing adjustment

result has failed. Use A4 or 8 1/2" X 11" paper. Press

[Execute] to print the adjustment result.

7) Tap the [Back] key to return to the Laser Adjustment

screen.

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Komentáře k této Příručce

Žádné komentáře

Sharp MX-7500N Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Multifunkční zařízení Sharp MX-7500N