Sharp DM-4500 Provozní pokyny stáhnout pdf (Strana 28)

6. Assembly

Caution!

Hg 50 burner:

After installation, the labeling must be

up-

right.

If a glass melt nipple is present (19a.4), posi-

tion it by turning the burner so that the

nipple does not impede the beam path later,

but instead is positioned

sideways.

Xe 75 burner:

Remove the burner’s dust cover (19b.5) after

you have installed the burner.

• To open the 106 z lamp housing, unscrew the

fastening screws on the cover.

• Remove the transport anchor (red plastic rod

in place of the burner) in the lamp mount. To

do so, remove the lower clamp (19.1). Pull up

the cooling element (19.3) and turn it to the

side. Detach the lower clamp system (19.2)

and remove the transport anchor.

• Install the burner in reverse order.

Fig. 19 a-c Lamp mounts for gas discharge lamps

1 Upper clamping system, 2 Lower clamping system, 3 Cooling element

4 Melt nipple for the Hg 50 arc lamp, 5 Dust cover for the Xe 75 arc lamp

Hg 50

Hg 100

Xe 75

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 163 164

Žádné komentáře

Sharp DM-4500 Provozní pokyny Strana 28