Sharp AR-650 Servisní příručka stáhnout pdf (Strana 314)

100

101

ADF 16 - 14

(7) Start of reversal to flapper solenoid OFF

After forward rotation transport is completed, the transport motor starts to rotate in the reverse direc-

tion and the reversal motor starts to rotate in the forward direction to rotate the transport belt and

reversal roller to start reversal of the original. The original passes along the reversal path and is

transported onto the original glass. The DF operation in progress signal is reset at the reset timing of

the DF operation in progress signal. The stop notice signal is set at the set timing of the stop notice

signal. The original top side/rear side signal is set or reset at the point when the exit sensor detects

the trailing edge of the original. The original stop signal is set at the set timing of the original stop

signal.

At the point when the trailing edge of the original has passed the reversal flapper, the flapper solenoid

turns OFF, and the reversal flapper is switched to the exit side.

(8) Setting the original at the exposure position (completion of No.1 side feed)

The original is transported by a specified number of pulses after reversal starts. At the point where

the original arrives at the exposure position, the transport motor and reversal motor stop, and feed is

completed. The original is stopped in contact with the original stopper, and the rear side of the origi-

nal is set.

1 2 ... 309 310 311 312 313 314 315 316 317 318 319 ... 395 396

Komentáře k této Příručce

Žádné komentáře

Sharp AR-650 Servisní příručka Strana 314

Komentáře k této Příručce

Související produkty a manuály pro Multifunkční zařízení Sharp AR-650