Sharp AR-M162 Specifikace

Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product.Before installing this product, be sure to read th

8INSTALLATION REQUIREMENTSImproper installation may damage this product. Please note the following during initial installation and whenever the machin

98LLINE indicator...15LINE STATUS indicator ...15Loa

99Convenient copy functions2 in 1 / 4 in 1 copy ...66Card shot...

100Pegasus-E_Copy_Ex.book 100 ページ ２００４年９月２３日　木曜日　午前１１時４１分

101Pegasus-E_Copy_Ex.book 101 ページ ２００４年９月２３日　木曜日　午前１１時４１分

102Pegasus-E_Copy_Ex.book 102 ページ ２００４年９月２３日　木曜日　午前１１時４１分

103✂KEY OPERATOR CODE NUMBER: FACTORY SETTINGThe following is the factory setting of the Key Operator Code Number, which must be used to access the Ke

Pegasus-E_Copy_Ex.book 104 ページ ２００４年９月２３日　木曜日　午前１１時４１分

The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sen

AR-M16 PRINTED IN CHINA2004M KS1TINSE1334QSZZAR-M161/AR-M162/AR-M165/AR-M206/AR-M207SHARP CORPORATIONThis manual has been printed using a vegetable-ba

9MANUALS PROVIDED WITH THE PRODUCTMultiple manuals are provided for use of the machine. Please read each manual as appropriate for the functions that

10MAIN FEATURESHigh-speed laser copying• First-copy time*1 at 300 dpi*2 is only 7.2 seconds.• Copying speed is 20 (AR-M206/AR-M207) or 16 (AR-M161/AR-

11MAIN FEATURESFax function (option)Installation of the optional facsimile expansion kit enables the plain-paper, Super G3 laser fax function to be us

121BEFORE USING THE PRODUCTThis chapter contains basic information required for use of the machine. Please read this chapter before using the machine.

13BEFORE USING THE PRODUCT1(15) Document cover (when installed)Open to make a copy from the document glass.(16) Side coverOpen to remove misfed paper.

14BEFORE USING THE PRODUCTOPERATION PANEL(1) Keys for fax function (when the fax option is installed)These are used in fax mode. For more information,

15BEFORE USING THE PRODUCT1(13) LINE STATUS indicator (when the fax option is installed)This key is used in fax mode. For more information, see the &q

16BEFORE USING THE PRODUCTDisplay (base screen)Example: Copy mode* The display shown is the AR-M206/AR-M207 (when the optional RSPF is installed) disp

171TURNING THE POWER ON AND OFFThe power switch is located on the left side of the machine.POWER ONTurn the power switch to the "ON" positio

WarrantyWhile every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no warranty of any kind wi

18BEFORE USING THE PRODUCTDefault settingsThe machine is set at the factory to return all settings to the default settings one minute after a copy job

19BEFORE USING THE PRODUCT1Special paperFollow these guidelines when using special paper.• Use SHARP recommended transparency film and label sheets. U

20BEFORE USING THE PRODUCTLoading paper in the bypass tray1Open the bypass tray.Pull out the bypass tray extension to load B4 and A3 (8-1/2" x 14

21BEFORE USING THE PRODUCT1CHANGING THE PAPER SIZE SETTING OF A TRAYIf the size of the loaded paper is different from the size shown in the display, f

22BEFORE USING THE PRODUCTDISABLING (ENABLING) AUTO TRAY SWITCHINGWhen auto tray switching is enabled and paper runs out during copying or printing, t

231AUDITING MODEWhen auditing mode is enabled, a count is kept of the pages printed by each account. The page counts can be viewed in the display.This

242TROUBLESHOOTING AND MAINTENANCEThis chapter explains general troubleshooting and maintenance procedures such as removing misfeeds, replacing the to

252TROUBLESHOOTINGMACHINE/COPYING PROBLEMSCheck the following troubleshooting list before requesting service as many problems can be fixed by the user

26TROUBLESHOOTING AND MAINTENANCEThe paper size used for the copy is different from the selected paper size (part of the image is cut off or too much

27TROUBLESHOOTING AND MAINTENANCE2The original size is not automatically selected or the copy is not made on paper that matches the size of the origin

1Part 1: General InformationPegasus-E_Copy_Ex.book 1 ページ ２００４年９月２３日　木曜日　午前１１時４１分

28INDICATORS AND DISPLAY MESSAGESIf one of the following messages appears in the display, take prompt action as instructed by the message.< >: T

292REMOVING MISFEEDSWhen a misfeed occurs during copying, the message " Clear paper path." and the location of the misfeed will appear.Check

30TROUBLESHOOTING AND MAINTENANCE2Open and close the SPF.Opening and closing the cover clears the misfeed display. Copying cannot be resumed until thi

31TROUBLESHOOTING AND MAINTENANCE2MISFEED IN THE MACHINETo remove a paper misfeed from the machine, the bypass tray and then the side cover must be op

32TROUBLESHOOTING AND MAINTENANCEMisfeed in B1Open the front cover.Push gently on both ends of the front cover.2Turn the roller rotating knob in the d

33TROUBLESHOOTING AND MAINTENANCE2Misfeed in C1Lower (1) in the illustration, open the fusing unit paper guide, and remove the misfed paper.Be careful

34TROUBLESHOOTING AND MAINTENANCEMISFEED IN TRAY 21Open the side cover.Grasp the handle to open the side cover.2Remove the misfed paper.Be careful not

352REPLACING THE TONER CARTRIDGEWhen the toner replacement icon ( ) appears, little toner remains. Obtain a replacement cartridge as soon as possible.

36CHECKING THE TOTAL OUTPUT COUNTTo check the total number of pages output in copy, print, and fax modes and the total scan count in scanner mode, hol

372CLEANING THE MACHINECLEANING THE DOCUMENT GLASS AND SPF/DOCUMENT COVERIf the document glass, SPF, underside of the document cover, or the scanner f

2Pegasus-E_Copy_Ex.book 2 ページ ２００４年９月２３日　木曜日　午前１１時４１分

38TROUBLESHOOTING AND MAINTENANCECLEANING THE TRANSFER CHARGERIf white or black lines appear in copies or the image is blotchy, the transfer charger m

392ADJUSTING THE DISPLAY CONTRASTThe contrast of the display can be adjusted as explained below.1Press the [SPECIAL FUNCTION] key.The special function

403PERIPHERAL DEVICES AND SUPPLIESOptional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies, contact

41PERIPHERAL DEVICES AND SUPPLIES3REVERSING SINGLE PASS FEEDER / SINGLE PASS FEEDERFor the names of the parts of the RSPF / SPF, see "PART NAMES

42PERIPHERAL DEVICES AND SUPPLIESDUAL FUNCTION BOARDA dual function board can be installed to add a variety of copy functions and enable use of the pr

43Part 2: Copier OperationPegasus-E_Copy_Ex.book 43 ページ ２００４年９月２３日　木曜日　午前１１時４１分

44Pegasus-E_Copy_Ex.book 44 ページ ２００４年９月２３日　木曜日　午前１１時４１分

454COPY FUNCTIONSThis chapter explains the basic procedures for making copies, including selection of the copy ratio and other copy settings.NORMAL CO

46COPY FUNCTIONS5Press the [START] key ( ) to begin copying.The copy will be delivered to the centre tray.Copying from the SPF1Open the SPF and make s

47COPY FUNCTIONS4Auto paper select modeWhen auto paper select mode is enabled, "AUTO" appears in the paper size display. This function autom

3Notes• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please contact your nearest

48COPY FUNCTIONSMAKING A COPY DARKER OR LIGHTERThe copy exposure can be adjusted as needed to the original. Three exposure modes are available: "

49COPY FUNCTIONS4SELECTING THE TRAYBy default the auto paper select function (page 47) operates, and thus the appropriate tray is automatically select

50COPY FUNCTIONSSELECTING THE ORIGINAL SIZEIf you loaded a non-standard size* original or the original size was not correctly detected, set the origin

51COPY FUNCTIONS4USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINALWhen the bypass tray is being used for copying and an original that is placed on

52REDUCING OR ENLARGING A COPYThere are three ways to enlarge and reduce copies:• Automatic selection of a ratio according to the paper size: Auto rat

53COPY FUNCTIONS43Select a preset ratio with the [ ] or [ ] key, or set the ratio (zoom) with the [ ] or [ ] key.[ ] key: Select a larger preset ratio

54SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY(XY zoom copying)Separate ratio settings can be selected for the length and width of a c

55COPY FUNCTIONS47Press the key.The vertical ratio can now be selected.8Set the vertical ratio with the [ ], [ ], [ ], or [ ] keys.A preset ratio ca

56TWO-SIDED COPYINGTWO-SIDED COPYINGThe machine is capable of the following types of automatic two-sided copying. The copy paper is turned over automa

57COPY FUNCTIONS4TWO-SIDED COPYING OF ONE-SIDED ORIGINALS• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2&q

4CONTENTSPart 1: General InformationPRODUCT CONFIGURATIONS ...

58COPY FUNCTIONSCopying from the document glass1Place the original for the front side of the copy on the document glass, and close the SPF.2Press the

59COPY FUNCTIONS4TWO-SIDED COPIES OF TWO-SIDED ORIGINALS (ONLY WHEN USING THE RSPF)• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11

60COPY FUNCTIONSONE-SIDED COPIES OF TWO-SIDED ORIGINALS (ONLY WHEN USING THE RSPF)• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11&

614TWO-SIDED COPIES USING THE BYPASS TRAYFollow the steps below to perform two-sided copying manually.Example: Copying original A and original B onto

62DUAL PAGE COPY(Dual page copy)The dual page copy function produces separate copies of open bound original pages. This function is convenient when yo

634INTERRUPTING A COPY RUN(Interrupt copying)A copy run can be temporarily interrupted to allow another copy job to be performed. (Interrupt copying)W

645CONVENIENT COPY FUNCTIONSThis chapter explains convenient copy functions that can be used when the dual function board (AR-EB9) is installed.Select

65CONVENIENT COPY FUNCTIONS51Place the originals in the document feeder tray or the first original on the document glass.If the originals are placed i

66COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER(2 in 1 / 4 in 1 copy)Multiple originals can be copied onto a single sheet of paper in a sele

67CONVENIENT COPY FUNCTIONS55Select "2in1/4in1" with the [ ] or [ ] key.6Press the [OK] key.The 2 in 1 / 4 in 1 selection screen will appear

5CONTENTSPart 2: Copier Operation4COPY FUNCTIONSNORMAL COPYING ... 45●MAKING A COPY DARKER OR LIGHTER ...48●SELE

68CREATING MARGINS WHEN COPYING(Margin shift)The margin shift function shifts the image to create a margin at the edge of the paper. By default the fu

695ERASING SHADOWS AROUND THE EDGES OF A COPY(Erase copy)This feature is used to erase shadows that appear around the edges of copies of books and oth

70CONVENIENT COPY FUNCTIONS7Select the erasure width with the [ ] or [ ] key.If you select 0 mm (0"), the printed result is the same as when &quo

715CARD SHOTWhen copying a card, this function allows you to print the front and back sides of the card next to each other on a single sheet of paper.

72CONVENIENT COPY FUNCTIONS8Press the [START] key ( ).The front side of the card is scanned.9Turn the original over on the document glass.10Press the

736APPENDIXSPECIFICATIONSName Digital Multifunctional SystemAR-M161/AR-M162/AR-M165 AR-M206/AR-M207Type DesktopPhotoconductive type OPC drumDocument g

74APPENDIXOutput tray specifications* When the job separator tray kit is installed, 150 sheets in centre tray, 100 sheets in top tray.The maximum numb

757KEY OPERATOR'S GUIDEPURPOSE OF THE KEY OPERATOR PROGRAMSThe key operator programs are used by the administrator of the machine to enable or di

76PROGRAMMING A KEY OPERATOR CODE1Press the [SPECIAL FUNCTION] key.The special function screen will appear.2Select "KEY OPERATOR PRG." with

777KEY OPERATOR PROGRAM LISTA list of basic programs used for the machine and a list of programs used for the copy function are shown below.Programs f

6CAUTIONSFollow the cautions below when using this machine.CAUTIONS ON USINGWarning:• The fusing area is hot. Exercise care in this area when removing

78USING THE KEY OPERATOR PROGRAMS1Press the [SPECIAL FUNCTION] key.The special function screen will appear.2Select "KEY OPERATOR PRG." with

79KEY OPERATOR'S GUIDE7ACCOUNT CONTROLThese programs are used to control use of the machine by account. To access one of these programs, select &

80KEY OPERATOR'S GUIDEResetting a single account1Select "RESET 1 ACC." with the [ ] or [ ] key and then press the [OK] key.2Select the

81KEY OPERATOR'S GUIDE7ACCOUNT LIMITThis program is used to set limits for the number of pages that can be printed by each account in print mode

82KEY OPERATOR'S GUIDESelect "WAITING COPY LAMP SETTING" and press the [OK] key. The following screen will appear.1Select "ON"

83KEY OPERATOR'S GUIDE7RETURN FROM COPY MODE TIMINGWhen there are print jobs or fax print jobs waiting to be printed after copy job is finished,

84KEY OPERATOR'S GUIDESelect "MESSAGE TIME" and press the [OK] key. The following screen will appear.1Select the desired display time w

85KEY OPERATOR'S GUIDE7To enable the setting, select "DISABLE PAPER SIZE SET" and press the [OK] key so that a checkmark appears in the

86KEY OPERATOR'S GUIDECOPY SETTINGSThese programs are used to enable various copy functions. To access one of these programs, select "COPIER

87KEY OPERATOR'S GUIDE7Select "DEFAULT TRAY SET" and press the [OK] key. The following screen will appear.1Select the tray with the [ ]

7CAUTIONSLASER INFORMATIONWave length 785 nm + 10 nm/- 15 nmPulse times (8.141 µs ± 0.1 µs)/7 mmOutput power 0.14 mW - 0.22 mWAt the production line,

88KEY OPERATOR'S GUIDERESOLUTION IN AUTO/TEXT MODEThis program is used to set the resolution used when the exposure mode is set to "AUTO&quo

89MATERIAL SAFETY DATA SHEET Page : 1/4Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 1.PRODU

90MATERIAL SAFETY DATA SHEET Page : 2/4Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 3.HAZAR

91MATERIAL SAFETY DATA SHEET Page : 3/4Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 Exposure

92MATERIAL SAFETY DATA SHEET Page : 4/4Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 Chronic E

93MATERIAL SAFETY DATA SHEET Page : 1/4Date Issued :Jun. 1, 2003 MSDS No. F-31211 1.PRODUCT AND COMPANY IDENTIFICATION

94MATERIAL SAFETY DATA SHEET Page : 2/4Date Issued :Jun. 1, 2003 MSDS No. F-31211 3.HAZARDS IDENTIFICATIONMost Importa

95MATERIAL SAFETY DATA SHEET Page : 3/4Date Issued :Jun. 1, 2003 MSDS No. F-31211 Exposure Limit ValuesOSHA-PEL(USA) : 1

96MATERIAL SAFETY DATA SHEET Page : 4/4Date Issued :Jun. 1, 2003 MSDS No. F-31211 Chronic Effect : In a study in rats o

97INDEXSymbols / Numbers[ ] key ..................152 in 1 / 4 in 1 copy .......