
Annex B of ECMA-370 4
th
edition Amended, February 2010 Page 5 (6)
Product environmental attributes - Market requirements (continued) Requirement met
Chemical emissions from printing products
Test performed according to ECMA-328 (ISO/IEC 28360) standard , other specify: RAL-UZ 171
Typical emission rate (print phase) is (mg/h):
Dust not detected/0.1 Ozone 1.9/06 Styrene 0.2/0.02 Benzene not detected TVOC 1.2/03
Chemical emission requirements of the following voluntary program/s Blue Angel are met for :
Dust Ozone Styrene Benzene TVOC
Electromagnetic emissions
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary
program/s:
Consumable materials for printing products
A Safety Data Sheet (SDS) is available for the ink/toner preparation, even if not legally required (see P4.3).
Paper containing post-consumer recycled fibers can be used, provided that it meets the requirements of
EN12281.
2-sided (duplex) printing/copying is an integrated product function.
Ergonomics for computing products
The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
Packaging and documentation
Product packaging material type(s): Paper/Cardboard weight (kg): 2.56
Product packaging material type(s): Plastic/EPS weight (kg): 0.52
Product packaging material type(s): Plastic/EPE weight (kg): 0.050.05
Product plastic packaging is free from PVC.
Specify media for user and product documentation (tick box):
Electronic , Paper , Other
For paper user and product documentation, please specify contained percentage of post-consumer recycled
fiber: 0%
User and product documentation do not contain chlorine bleached paper
Additional information (See Note B4)
Toner cartridge yield, average: black toner 40K
printed on one-sided on A4 paper, 5 % coverage. Measured according to SHARP's standard.
Note B4: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and
hitting the <Enter> key.
Komentáře k této Příručce