Sharp AL-2050CS Digital Multifunctional System Operation Servisní příručka stáhnout pdf (Strana 78)

AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 26

1) Remove the pick-up roller.

2) Remove the gear.

C. Paper exit roller

1) Remove four gears.

2) Remove two screws.

3) Remove the frame.

1) Remove the E-ring.

2) Remove the bearing.

3) Remove the paper guide unit.

4) Remove the paper exit roller.

D. Set sensor, scan front sensor

1) Remove the set sensor.

2) Remove the scan front sensor.

3) Disconnect the connectors.

∗ When assembling, attach the blue harness to the marking B side

of the sensor, and attach the orange harness to the opposite side

sensor.

E. Transport roller

1) Remove the actuator.

2) Remove the transport roller.

3) Remove the gear and the bearing.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 171 172

Žádné komentáře

Sharp AL-2050CS Digital Multifunctional System Operation Servisní příručka Strana 78