Sharp PN-V602 Manuál s instrukcemi stáhnout pdf (Strana 54)

The Power LED is ashing in red and green alternately.

When “TEMPERATURE” is displayed in the corner of the

screen.

• Whentheinternaltemperatureofthemonitorrises

excessively, the brightness of the backlight decreases

automaticallyinordertopreventhigh-temperature-

relatedproblems.Whenthisoccurs,“TEMPERATURE”is

displayedonthescreenandthePowerLEDashesred

andgreenalternately.(WhenTEMPERATUREALERTis

settoOSD&LED.Thisvariesdependingonthesetting.)

• Iftheinternaltemperaturerisesfurther,themonitor

automaticallyentersstandbymode.(ThePowerLED

continuesashingredandgreenalternately.)

• Removethecauseoftheexcessivetemperaturerise.

-Ifthemonitorentersstandbymodeduetoarisein

temperature, to return to normal display, turn the power

switch off and then back on again. The monitor, however,

will enter standby mode again if the cause of the

temperature rise is not eliminated.

-Checkwhetherthemonitorisplacedatalocationwhere

aquickriseintemperatureislikely.Internaltemperature

risesquicklyiftheventsonthemonitorareblocked.

-Internaltemperaturerisesquicklyifdustaccumulates

inside the monitor or around the vents. Remove dust if

possible.AskSHARPdealeraboutremovinginternaldust.

Troubleshooting

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Žádné komentáře

Sharp PN-V602 Manuál s instrukcemi Strana 54