Sharp FO-DC535 Uživatelský manuál stáhnout pdf (Strana 76)

Verification Stamp Option

3 Press and then or

until the desired setting is selected.

• Note: “TX” stands for “transmission”

and “RX” stands for “reception”.

“AUTO” and “MANU” indicate AUTO

and MANUAL reception modes.

4 Press .

5 Go back to Step 3 to select a setting for the other line, or press to

exit.

START/

ENTER

START/

ENTER

STOP

Settings for Line 1:

LINE 1 SETTING

1=TX AND RX (AUTO)

2=TX AND RX (MANU)

3=RX (AUTO) ONLY

4=RX (MANU) ONLY

Settings for Line 2:

LINE 2 SETTING

1=TX AND RX (AUTO)

2=TX ONLY

3=RX ONLY

Verification Stamp Option

When transmitting a document, you can have the machine stamp each

document page as it is scanned. After scanning, you can check to see if all

documents have been stamped to verify that no double feeds occurred. (A

double feed occurs when two pages are fed through the scanner at once,

which means that one of the pages is not scanned.)

To use this function, have your dealer install the Verification Stamp option,

and then set Option Setting 29 to ON as explained on page page 209.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 247 248

Žádné komentáře

Sharp FO-DC535 Uživatelský manuál Strana 76