Sharp PG-D2510X Průvodce nastavením Strana 70
- Strana / 76
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
68
Troubleshooting
Problem Check Page
No picture and no sound
or projector does not
start.
Projector power cord is not plugged into the wall outlet.•
24
Power to the external connected devices is off.• –
The lens shutter is closed.•
25, 29
The selected Input mode is wrong.• 29
The AV Mute function is working.• 29
Cables are incorrectly connected to the projector.• 21–24
Remote control battery has run out.• 15
External output has not been set when connecting a notebook computer.
• 21
The lamp unit cover is not installed correctly.• 57, 58
Sound is heard but no
picture appears
(or picture is dark).
Cables are incorrectly connected to the projector.•
21–24
“Bright” is set to minimum position.• 42
Depending on the computer you are using, an image may not be
projected unless the signal output setting of the computer is switched
to the external output. Refer to the computer's operation manual for
how to switch its signal output settings.
Is “On” selected in “DLP
®
Link
TM
”?
•
•
–
52
Dark or bluish image
Check that “Wall Color” is confi gured correctly.•
48
Color is faded or poor.
Image adjustments are incorrectly set.
Make adjustments of “Color” and “Tint” in “Picture Mode” and lower the
“BrilliantColor
TM
” value.
•
•
42
(S-Video, Video Input only)
Video input system is incorrectly set.
(COMPUTER/COMPONENT1, 2 Input only)
Input signal type (RGB/Component) is incorrectly set.
•
•
45
44
Picture is blurred;
noise appears.
Adjust the focus.•
26
The projection distance exceeds the focus range.• 19
There is fog on the lens. If the projector is carried from a cold room into a
warm room, or if it is suddenly heated, condensation may form on the surface
of the lens and the image will become blurred. Set up the projector at least
one hour before it is to be used. If condensation should form, remove the
power cord from the wall outlet and wait for it to clear.
• –
(Computer Input only)
Perform “SIG-ADJ” Adjustments (“Clock” and “Phase” Adjustment)
Noise may appear depending on the computer.
•
•
44
–
Picture appears but no
sound is heard.
Cables are incorrectly connected to the projector.•
21–24
Volume is set to minimum.
When the projector is connected to an external device and the volume
is set to minimum, the sound is not output even if you turn up the
volume of the external device.
•
•
29
“Speaker” is set to “Off”.
The Audio Mute function is working.
•
•
49
52
Data image is not
centered.
Make the necessary adjustments of each item in the “SIG-ADJ” menu.•
44
Depending on the computer you are using, the output resolution signal
may be different from the one you have set. For details, refer to the
operation manual of the computer.
• –
An unusual sound is
occasionally heard from
the cabinet.
If the picture is normal, the sound is due to cabinet shrinkage caused
by room temperature changes. This will not affect operation or
performance.
• –
- PG-D2510X 1
- Serial No.: 2
- Model No.: 2
- WARNING: 3
- INFORMATION 4
- PRODUCT DISPOSAL 4
- For Future Reference 5
- Contents 6
- Reference 7
- IMPORTANT SAFEGUARDS 8
- Introduction 11
- fi r s t 12
- Accessories 13
- Part Names and Functions 14
- Inserting the Batteries 17
- Usable Range 17
- Easy Start 18
- Setting Up the Projector 20
- 16:9 Signal Input (16:9 Mode) 21
- Projection (PRJ) Mode 22
- Terminals on the Projector 23
- RCA adaptor plug 24
- (commercially available) 24
- Connections 25
- Connecting the Power Cord 26
- Turning the Projector On/Off 27
- Image Projection 28
- 2 Adjusting the Height 29
- 3 Adjusting the Picture Size 29
- 0KEYSTONE 30
- ADJUST END 30
- Switching the Input Mode 31
- Adjusting the Volume 31
- Displaying the Black Screen 31
- Temporarily 31
- Image Projection (Continued) 32
- About Copyrights 33
- 1/9 1/25 1/8 34
- Useful 35
- Features 35
- Connecting with a USB cable 36
- The mouse pointer can be 36
- Menu Items 37
- (Continued) 38
- Press RETURN to return 40
- To adjust the projected 42
- (Continued) 44
- SEL./ADJ. ENTER END 46
- Pict. SIG-ADJ SCR PRJ1 PRJ2 46
- Fan Mode Setting 52
- System Lock Function 52
- Maintenance 55
- Maintenance Indicators 56
- Appendix 57
- Regarding the Lamp 58
- Removing and Installing the 59
- Lamp Unit 59
- Resetting the Lamp Timer 60
- Connecting Pin Assignments 61
- Computer control 63
- Communication conditions 63
- Basic format 63
- Power ON 65
- Standby mode 65
- (or 30-second startup time) 65
- Compatibility Chart 69
- Troubleshooting 70
- For SHARP Assistance 72
- Specifi cations 73
- Dimensions 74
Související produkty a manuály pro Datové projektory Sharp PG-D2510X
Datové projektory Sharp XG-F315X Specifikace
(72 stránky)
(72 stránky)
Datové projektory Sharp XG-NV5XU Specifikace
(54 stránky)
(54 stránky)
Datové projektory Sharp XG-C455W Provozní pokyny
(73 stránky)
(73 stránky)
Datové projektory Sharp AN-CM250 Specifikace
(97 stránky)
(97 stránky)
Datové projektory Sharp XV-Z10E Specifikace
(73 stránky)
(73 stránky)
Datové projektory Sharp Notevision XR-1X Specifikace
(70 stránky)
(70 stránky)
Datové projektory Sharp CMS-R600X Uživatelský manuál
(70 stránky)
(70 stránky)
Datové projektory Sharp IQ-8000 Specifikace
(10 stránky)
(10 stránky)
Datové projektory Sharp DK-AP7P - Portable Speakers With Digital Player Dock Uživatelský manuál
(17 stránky)
(17 stránky)
Datové projektory Sharp AN-CM270 Uživatelský manuál
(18 stránky)
(18 stránky)
Datové projektory Sharp XG-NV5XB Specifikace
(54 stránky)
(54 stránky)
Datové projektory Sharp PG-D210U Specifikace
(40 stránky)
(40 stránky)
Datové projektory Sharp AN-P12EX Specifikace
(59 stránky)
(59 stránky)
Datové projektory Sharp XG-C455W Specifikace
(45 stránky)
(45 stránky)
Datové projektory Sharp CD-E250E Uživatelský manuál
(16 stránky)
(16 stránky)
American Dynamics ULTRA VIIE manuales
Manuales del propietario y guías del usuario para Cámaras De Seguridad American Dynamics ULTRA VIIE.
Ofrecemos 5 manuales en pdf American Dynamics ULTRA VIIE para descargar gratis por tipos de documentos: Manual de usuario, Manual del operador, Guía de instalación
Komentáře k této Příručce