Sharp AN-P12EX Specifikace Strana 55
- Strana / 59
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
-55
Communication cannot be established with the projector
When connecting the projector using serial-connection
\ Check that the RS-232C terminal of the projector and a computer or the commercially
available controller are connected correctly.
\ Check that the RS-232C cable is a cross-over cable.
\ Check that the RS-232C port setting for the projector corresponds to the setting for the
computer or the commercially available controller.
When connecting the projector to a computer using network (LAN)-
connection
\ Check that the cable’s connector is firmly inserted in the LAN terminal of the projector.
\ Check that the cable is firmly inserted into a LAN port for a computer or a network device
such as a hub.
\ Check that the LAN cable is a Category 5 cable.
\ Check that the LAN cable is a cross-over cable when connecting the projector to a computer
directly.
\ Check that the LAN cable is a straight-through cable when connecting the projector with a
network device such as a hub.
\ Check that the power supply is turned on for the network device such as a hub between the
projector and a computer.
Check the network settings for the computer and the projector
\ Check the following network settings for the projector.
• IP Address
Check that the IP address for the projector is not duplicated on the network.
• Subnet Mask
When the gateway setting for the projector is “0.0.0.0” (Not Used), or the gateway setting for
the projector and the default gateway setting for the computer are the same:
• The subnet masks for the projector and the computer should be the same.
• The IP address parts shown by the subnet mask for the projector and the computer should
be the same.
(Example)
When the IP address is “192.168.150.2” and the subnet mask is “255.255.255.0” for the
projector, the IP address for the computer should be “192.168.150.X” (X=3-254) and the
subnet mask should be “255.255.255.0”.
• Gateway
When the gateway setting for the projector is “0.0.0.0” (Not Used), or the gateway setting for
the projector and the default gateway setting for the computer are the same:
• The subnets for the projector and the computer should be the same.
• The IP address parts shown by the subnet mask for the projector and the computer should
be the same.
(Example)
When the IP address is “192.168.150.2” and the subnet mask is “255.255.255.0” for the
projector, the IP address for the computer should be “192.168.150.X” (X=3-254) and the
subnet mask should be “255.255.255.0”.
• Data Port
Other computers should not use the data port of the projector.
The data port should be used for communication during the stack projection.
Note
• The factory default settings for the projector are as follows:
DHCP Client : OFF
IP address : 192.168.150.2
Subnet mask : 255.255.255.0
Gateway address : 0.0.0.0 (Not Used)
• For network settings for the projector, refer to page 24.
Troubleshooting
- XG-P610X 1
- XG-P610X-N 1
- SETUP MANUAL 1
- Setting up the Screen 2
- Throw Distance 3
- F2.5, f=25.5-32 mm 4
- Fixed Wide Lens (AN-P8EX) 5
- Fixed Wide Lens (AN-P12EX) 6
- Wide-zoom Lens (AN-P15EZ) 7
- Tele-zoom Lens (AN-P23EZ) 8
- Tele-zoom Lens (AN-P30EZ) 9
- Tele-zoom Lens (AN-P45EZ) 10
- HDMI Terminal 11
- Connecting Pin Assignments 12
- Transmission control code 13
- Basic format 14
- Computer control 14
- Communication conditions 14
- Commands 15
- Pages 22, 23 20
- Pages 24, 25 20
- 4 Turn on the computer 21
- 4 Click “Properties” 22
- 3 When the screen as shown on 24
- 5 Click the “Apply” button 25
- Controlling the Projector 26
- Using Internet Explorer 26
- Confirming the Projector 27
- Status (Status) 27
- Setting and Adjusting the 28
- Projector 28
- Setting the Security 28
- Making General Settings 29
- Setting for Sending E-mail 29
- (Mail – Recipient Settings) 30
- (Service & Support – 30
- Access URL) 30
- When Connecting Using 31
- SETUP MENU (Main Menu) 33
- ADVANCED SETUP MENU 33
- View Setting Detail List 34
- Set Items 34
- Save Settings and Quit 35
- Quit without Saving Set 35
- IP Address Setting 36
- Subnet Mask Setting 36
- Default Gateway Setting 36
- User Name Setting 36
- Password Setting 37
- RS-232C Baud Rate Set 37
- Projector Name Setting 37
- DHCP Client Setting 37
- ([D]Disconnect All) 38
- ([A]Advanced Setup) 38
- (ADVANCED[1]Auto Logout Time) 38
- (ADVANCED[2]Data Port) 38
- Carrying out Network Ping 39
- Setting of Accept IP Ad 39
- Accepting All IP Addresses 39
- Setting of Search Port 40
- Return to Default Settings 40
- Return to Main Menu 40
- Stack Projection 41
- 6 Connect the COMPUTER/COMPO 43
- Video Wall Projection 44
- Application 49
- Troubleshooting 55
- Dimensions 58
Související produkty a manuály pro Datové projektory Sharp AN-P12EX
Datové projektory Sharp XG-C455W Specifikace
(45 stránky)
(45 stránky)
Datové projektory Sharp CD-E250E Uživatelský manuál
(16 stránky)
(16 stránky)
Datové projektory Sharp R-210D Specifikace
(6 stránky)
(6 stránky)
Grizzly G3183 manuales
Manuales del propietario y guías del usuario para Herramientas Grizzly G3183.
Ofrecemos 1 manuales en pdf Grizzly G3183 para descargar gratis por tipos de documentos: Manual de usuario
Más productos y manuales para Herramientas Grizzly
| Modelos | Tipo de documento |
|---|---|
| Industrial Torque Wrench H8000 |
Manual de usuario
Grizzly Industrial Torque Wrench H8000 User Manual,
2 paginas
|
| G1495 |
Manual de usuario
Grizzly G1495 User Manual,
28 paginas
|
| 8" Jointer G0500 |
Manual de usuario
Grizzly 8" Jointer G0500 User Manual,
72 paginas
|
| Press Vise G5749 |
Manual de usuario
Grizzly Press Vise G5749 User Manual,
2 paginas
|
| 17" Heavy Duty-Bandsaw G0513X2BF |
Manual de usuario
Grizzly 17" Heavy Duty-Bandsaw G0513X2BF User Manual,
108 paginas
|
| G4787 |
Manual de usuario
Grizzly G4787 User Manual [it] ,
2 paginas
|
| G0633/G0634 |
Manual de usuario
Grizzly G0633/G0634 User Manual,
72 paginas
|
| G1033Z |
Manual de usuario
Grizzly G1033Z User Manual,
8 paginas
|
| H4380 |
Manual de usuario
Grizzly H4380 User Manual,
20 paginas
|
| HVLP Spray Gun Set H7671 |
Manual de usuario
Grizzly HVLP Spray Gun Set H7671 User Manual,
20 paginas
|
| G0538 |
Manual de usuario
Grizzly G0538 User Manual,
2 paginas
|
| G8593 |
Manual de usuario
Grizzly G8593 User Manual [ru] ,
13 paginas
|
| H7757 |
Manual de usuario
Grizzly H7757 User Manual,
24 paginas
|
| H6362 |
Manual de usuario
Grizzly H6362 User Manual [ru] [pl] ,
2 paginas
|
| G8125 |
Manual de usuario
Grizzly G8125 User Manual [ru] [es] ,
2 paginas
|
| 16 Guage Finish Nailer H6143 |
Manual de usuario
Grizzly 16 Guage Finish Nailer H6143 User Manual,
20 paginas
|
| G8688 |
Manual de usuario
Grizzly G8688 User Manual,
48 paginas
|
| 1/4" Impact Screwdriver PC8030 |
Manual de usuario
Grizzly 1/4" Impact Screwdriver PC8030 User Manual [ru] [pl] ,
2 paginas
|
| Jointer w/ Spiral Cutterhead G0656X |
Manual de usuario
Grizzly Jointer w/ Spiral Cutterhead G0656X User Manual [ru] [es] ,
66 paginas
|
| G0663 |
Manual de usuario
Grizzly G0663 User Manual,
2 paginas
|
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.018 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce